SAE 30R7 ईंधन नली
SAE 30R7 hoses are designed for fuel. These can go under the hood and are typically used for low-pressure applications like carburetors or a fuel return line. It can also be used for PCV connections and emissions devices.
designed for conveying gasoline, E-85, diesel and biodiesel (B-20) fuels in vehicles. This premium hose handles higher temperatures, withstands oil, abrasion and ozone. Exceeds the burst requirements of the SAE30R6, in most markets, SAE 30R6 has been replaced by SAE 30R7.
TUBE: Nitrile
COVER: Nitrile Blend
सुदृढ़ीकरण: 2-Spiral Polyester / Single textile braid
TEMPERATURE RANGE: -40°F to +257°F, -40°C to +125°C (+302°F Intermittent —Not for Steam Use)
SPECIFICATIONS: Similar to SAE 30R7
WARNING: Do not use for pressure lines or fuel injected engines.
| कोड | आयाम | आयुध डिपो | दीवार की मोटाई | कार्य का दबाव | फटने का दबाव | लंबाई | |||||
| इंच | मिमी | मिमी | छड़ | साई | छड़ | साई | एम | ||||
| 30R7-03 | 3/16" | 5 | 11 | 3 | 20 | 300 | 60 | 900 | 100 | ||
| 30R7-04 | 1/4" | 6.3 | 13 | 3.4 | 20 | 300 | 60 | 900 | 100 | ||
| 30R7-05 | 5/16" | 8 | 15 | 3.5 | 20 | 300 | 60 | 900 | 100 | ||
| 30R7-06 | 3/8" | 9.5 | 17 | 3.8 | 20 | 300 | 60 | 900 | 100 | ||
| 30R7-07 | 7/16" | 11 | 18.4 | 3.7 | 20 | 300 | 60 | 900 | 100 | ||
| 30R7-08 | 1/2" | 12.7 | 21 | 4.2 | 20 | 300 | 60 | 900 | 100 | ||
| 30R7-09 | 9/16" | 14.3 | 22 | 3.85 | 20 | 300 | 60 | 900 | 100 | ||
| 30R7-10 | 5/8" | 16 | 26 | 5 | 20 | 300 | 60 | 900 | 100 | ||
| 30R7-12 | 3/4" | 19 | 29 | 5 | 20 | 300 | 60 | 900 | 100 | ||
| 30R7-14 | 7/8" | 22 | 31 | 4.5 | 20 | 300 | 60 | 900 | 100 | ||
| 30R7-16 | 1" | 25.4 | 36 | 5.3 | 20 | 300 | 60 | 900 | 100 | ||
संबंधित उत्पाद
What is SAE J30 Standard?
If you look at the side of a fuel hose, you will see the letters “SAE” followed by the number 30 (some will have a J first). Next in the sequence will be the letter “R” followed by a number. The number after the “R” refers to the section of the performance standard it pertains to. The criteria are typically permeation, chemical resistance, construction, temperature range and kink resistance. The higher the standards go, the more criteria that must be met.
“R” numbers in some cases do not determine the pressure rating for the hose. Hose manufacturers typically print on the hose if it is intended for use on fuel injection systems. Also, you should check with the manufacturer of the hose to see if it is compatible with fuels like E85 or biodiesel.
What difference between J30R6 and J30R7 hose?
SAE 30R6 hoses are designed for low-pressure applications like carburetors, filler necks and connections between tanks. In most markets, SAE 30R6 has been replaced by SAE 30R7.
What is J30R7 fuel hose?
SAE 30R7 hoses are designed for fuel. These can go under the hood and are typically used for low-pressure applications like carburetors or a fuel return line. It can also be used for PCV connections and emissions devices.
Where do J30R7 Hose design for?
J30R7 Hose is designed for conveying gasoline, E-85, diesel, and bio-diesel fuels in cars, trucks, buses, etc.