Wąż do czyszczenia wodą
Water Blast Hoses are compact, lightweight, and flexible; designed for extremely high-pressure water blasting applications. Construction consists of four to six high-strength steel spirals and a synthetic rubber hose with a heat, ozone and abrasion-resistant outer layer.
Water blast hose is commonly used for hydro demolition (breaking up concrete using water instead of jackhammers). It is also used to clean large tanks, heat exchangers, and pipes, and to remove marine growth from ships and docks. All components are tested to 1.5 times the working pressure before leaving our factory.
Sinopulse water blast hose products are capable of operating at ultra-high pressures and temperatures and meet stringent industry safety standards. These water blast hoses have excellent operating characteristics and are proven to increase operator efficiency. They also reduce downtime and extend service life, making them suitable for a wide range of applications in many major industrial markets. Sinopulse - the manufacturer of water blast hoses that deliver high efficiency, reliable handling, and excellent safety standards.
BUDOWA:
Rura: Kauczuk syntetyczny NR i SBR, kolor czarny.
Wzmocnienie: 1ply or 2ply high tensile polyester thread braiding
Okładka: NR & SBR synthetic rubber,smooth or wrapped surface, black,yellow,red available
TEMPERATURA: -32°C do +82°C.
APLIKACJA: Mainly used for conveying of air, inert gas and water in mining, construction, engineering, shipbuilding, steel production etc. Water blast hose is commonly used for hydrodemolition (breaking up concrete using water instead of jackhammers). It is also used to clean large tanks, heat exchangers, and pipes, and to remove marine growth from ships and docks. All components are tested to 1.5 times the working pressure before leaving our factory.
- Surface preparation
- Pavement maintenance
- Paint removal
- Corrosion and dust removal
- Welding residue, drawing compounds removal
- Tank cleaning
- Hydrodemolition of concrete
- Water Jets texture sandstone
- Water Jet cutting of food and soft materials
- Abrasive Jet cutting of hard materials
| Kod | Średnica wewnętrzna | Średnica zewnętrzna | Ciśnienie robocze | Ciśnienie rozrywające | Promień gięcia | Waga | |||
| # | Cal | mm | mm | bar | psi | bar | psi | mm | kg/m |
| WBLH06 | 1/4" | 6 | 14.7 | 84 | 1218 | 210 | 3045 | 130 | 0.250 |
| WBLH08 | 5/16" | 8 | 18.7 | 74 | 1073 | 184 | 2668 | 150 | 0.360 |
| WBLH10 | 3/8" | 10 | 24.4 | 88 | 1276 | 220 | 3190 | 200 | 1.020 |
| WBLH13 | 1/2" | 13 | 34.0 | 84 | 1218 | 210 | 3045 | 300 | 1.900 |
| WBLH19 | 3/4" | 19 | 25.0 | 84 | 1218 | 210 | 3045 | 300 | 1.900 |
Our water blast hose products are capable of operating at ultra-high pressures and temperatures and meet stringent industry safety standards. These water blast hoses have excellent operating characteristics and are proven to increase operator efficiency. They also reduce downtime and extend service life, making them suitable for a wide range of applications in many major industrial markets. Sinopulse - the manufacturer of water blast hoses that deliver high efficiency, reliable handling, and excellent safety standards.
Fabryka węży Sinopulse
Surowiec:
Importowany materiał gumowy Wietnam i Tajlandia
Wysoka wytrzymałość drutu stalowego 2750Mpa z fabryki najwyższej klasy w Chinach
Mocne, bezpieczne i stabilne produkty z wężami hydraulicznymi
Dobra dyspersyjność, wysokie ciśnienie nośne i doskonała wydajność pulsacyjna.
Doskonała odporność na olej, ciepło i starzenie.
Doskonała odporność na zginanie i zmęczenie
Warsztat fabryczny:
Sinopulse to 100% producent węży hydraulicznych i przemysłowych, obejmujących wszystkie dziedziny przemysłu naftowego, rolnictwa, transportu, budownictwa, górnictwa i leśnictwa.
Dzienna wydajność 500 000 metrów węży, powierzchnia warsztatu 40 000 m²
40 linii produkcyjnych, w tym maszyny do szybkiego łączenia, maszyny do oplatania, maszyny spiralne o dużej prędkości, automatyczne maszyny przemysłowe włoskiej firmy VP oraz kompletna seria urządzeń do badań laboratoryjnych
W skład naszego wspaniałego zespołu wchodzi 120 wykwalifikowanych pracowników, 6 inżynierów, 2 doradców technicznych ze znanych międzynarodowych firm, 2 działy kontroli jakości i 2 kierowników magazynu.
50 specjalistów ds. sprzedaży i trzy grupy specjalistów ds. logistyki obsługują naszych klientów z Włoch, Niemiec, Wielkiej Brytanii, Hiszpanii, USA, Kanady, Brazylii, Argentyny, Panamy, Peru, Chile, Wietnamu, Indonezji, Australii i Rumunii
Laboratorium:
Nasza fabryka dysponuje pełną gamą sprzętu do badań laboratoryjnych. Dysponujemy zaawansowanymi możliwościami laboratoryjnymi, umożliwiającymi przeprowadzanie testów jakości produktów oraz prac badawczo-rozwojowych, aby zapewnić stabilną i doskonałą jakość produktów.
Po zakupie surowców testujemy każdą partię, aby mieć pewność, że spełnia ona techniczne wymagania naszego produktu.
Po wyprodukowaniu testujemy każdy wąż, jego działanie i ciśnienie rozrywające, a także przeprowadzamy test pulsacyjny dla każdego zamówienia, aby upewnić się, że po opuszczeniu fabryki wąż spełnia wymagania normy 100%.
Dokładamy wszelkich starań, aby dostarczać naszym klientom węże najwyższej jakości, robiąc wszystko, co w naszej mocy, aby zagwarantować ich jakość.
„Aby nasi użytkownicy czuli się komfortowo podczas użytkowania i bezpiecznie podczas jazdy!” to nasz wspólny cel.
Opakowanie produktu:
1. W przypadku pakowania węży hydraulicznych do kartonów lub skrzyń drewnianych zgodnie z wymaganiami klienta.
2. Po zakończeniu produkcji węża zapakujemy go.
3. Do pakowania używa się zazwyczaj worków tkanych i folii plastikowych.
4. Specjalne opakowania mogą być dostarczone zgodnie z wymaganiami klienta. Specjalne opakowania są życzeniem klientów Edible ACC Ording.
What is a high-pressure water blaster hose?
Water blaster hose comes in many forms depending on the application. Typically, it is a special heavy-duty hose designed to withstand the high-pressure water used to blast sewers. To maximize its lifespan, the hose needs to be strong, durable, and kink-resistant.
What are the uses of high pressure water blaster hose?
The high pressure water blaster hose is often used for hydrodemolition (breaking concrete with water instead of a jackhammer). It is also used to clean large tanks, heat exchangers and pipes, and to remove marine growth on ships and docks. Since only water is used in the work, and no chemicals or abrasives are used, water blasting is an environmentally friendly cleaning and surface preparation method. All hose assemblies are tested to 1.5 times the working pressure before leaving our factory and are equipped with special male NPT threaded fittings.
General Safety Guide for Waterblast Hose
High-pressure water is dangerous and can cause death, injury or property damage. Always use appropriate personal protective equipment including clothing, goggles, gloves and shoes. Only properly trained and authorized personnel may use hose assemblies. The area where hose assemblies are used must be clear of bystanders and properly marked. Never use a hose assembly above its working pressure and below its minimum bend radius. Always visually inspect hose assemblies before use. Do not use hose assemblies with corroded, leaking, worn or mechanically damaged fittings. Do not use hoses with blisters, cuts or exposed braid. Do not use hoses with kinks, dents or damage. Do not use hoses exposed to corrosive chemicals or high temperatures. When using hoses, avoid kinking, twisting, stretching and contact with sharp edges. A few percent change in hose length under pressure must be considered to avoid excessive stretching. Several sections of hose can be connected using suitable high-pressure fittings. It is not recommended to hang connected hose sections or let the hose support its own weight. Always clean, drain and coil the waterblast hose after use
What is a water blaster hose?
A high pressure water blaster hose is a specially designed hose that delivers high-pressure water to clean drains, culverts and pipes. A high-quality sewer spray hose needs to be durable and resistant to kinks and breaks. No spray hose lasts forever, but if you use the correct safety tools, such as tiger tail brackets and leader hoses, it will significantly increase the longevity and safety of your hose.
Do I need a special high pressure water blaster hose for high pressure water blasting?
Yes. All high pressure blasting equipment requires a special high pressure water blaster hose that is designed to handle the PSI and GPM that the machine is running at.
What are the common sizes of water blaster hose?
Water blaster hoses come in different lengths and diameters. These sizes include 1 inch, ¾ inch, 3/8 inch, 5/8 inch, and more.
How to Care for and Maintain a Water Blaster Hose
The most important thing to remember when using a water blaster hose is that the life and durability of the hose is almost entirely dependent on how carefully the hose is handled. Safety tools such as tiger tails, manhole rollers, or manhole protectors must be used. The most dangerous risk to a hose is rubbing against the sharp edges of a pipe or manhole while blasting. Over time, this wear and tear can cause small abrasions in the hose, which can lead to dangerous hose bursts. The typical life of a well-cared-for water blaster hose is about one year, but the hose's life may be shortened or extended depending on the precautions taken by the customer.
What are the accessories for water blaster hose?
In addition to the hose, there are a few accessories you may need, including:
Mounted Mini Reel Kit: The mini water blaster hose reel easily mounts to your tool box or back rail, giving your blaster the flexibility to clean smaller residential pipes.
Tiger Tail Bracket: Thread your water blaster hose through this protective tube to prevent your expensive high-pressure hose from rubbing against the sharp edges of your pipes.
Water Pilot Hose: This short hose should be attached to the end of the blasting hose and must be a different color to alert the operator when the nozzle is close to the pipe entrance. It can also be used as an inexpensive sacrificial hose and can be easily replaced.
How do I connect the nozzle to the water blaster hose?
To install the nozzle onto the high pressure water blaster hose, install the nozzle directly onto the male end of the hose and tighten with a wrench. Make sure it is tight so that the nozzle does not fall off the end of the hose during blasting. There is no need to use Teflon tape or similar tape to seal the nozzle to the hose, as nozzles are often interchanged so the tape would be wasted.
How do I choose the size of my high pressure water blaster hose?
This is an important question to answer before choosing your hose. The size of the hose you use will depend on the size of the blasting pipe and the pressure and flow rate your machine will run at.
What is the PSI rating for a high pressure water blaster hose?
All high pressure hoses have a working pressure rating and a burst pressure rating. For example, a ½” red hose has a working pressure of 4,000 PSI and a burst pressure of 16,000 PSI. This means that the hose is designed to operate at 4000PSI, but if the hose is in good condition, it should be able to withstand a burst pressure of up to 16,000 PSI. The working pressure should match the highest PSI you will be operating the machine at. Hoses naturally wear out over time, but this is often exacerbated by the lack of proper safety fittings, such as tiger tails. This wear can cause punctures, so hoses should be checked regularly for any nicks or wear.
What is the price range for high pressure water blaster hose?
The price range for high pressure water blaster hose varies by size, brand, and pressure. Call your Sinopulse representative today to learn which hose is best for your application and budget.