Wąż hydrauliczny EN 857 2SC
EN 857 2SC hydraulic hose jest two high tensile steel wire braided hydraulic hose. EN 857 2SC hydraulic hose is similar to EN 853 2SN hydraulic hose in structure. But EN 857 2SC hose has a smaller outside diameter, more flexible. Ten bending radius of 2sc hose is half of that of 2SN hose, so 2SC is suitable for the equipment piping whose installation space is compact and narrow.
Ten 2SC hydraulic hose features a 3 layer structure, with an inner tube made of oil-resistant, wear-resistant, and corrosion-resistant synthetic rubber. It can reliably transport water-based or petroleum-based hydraulic fluids without leakage. The reinforcement layer consists of two layers of high-strength steel wire braiding, giving the hose excellent high-pressure resistance. This ensures greater reliability and safety in high-pressure environments. The outer layer is also made of high-quality synthetic rubber, providing better resistance to chemicals, weather changes, ozone, aging, sunlight, and cutting. This makes the hose more durable and reliable.
The hose design meets the strict requirements of the EN857 2SC standard, ensuring its superior quality and performance.
High-pressure and 2 wire braid EN 857 2SC hydraulic hose is suitable for hydraulic systems where tight bends and maximum abrasion resistance are urgently required. Oil-resistant hose will not deform when transporting water- and petroleum-based hydraulic fluids in the -40°C to 100°C range.
EN 857 2sc hose is composed of three parts: tube, reinforcement and cover. The tube is made from oil, abrasion and corrosion resistant kauczuk syntetyczny. Ten reinforcement is made from two layers of high tensile steel wires, making the hose highly resistant to high pressure . Therefore, the hose has excellent performance in the high pressure working conditions. The cover is made from high quality synthetic rubber, making the hose resistant to abrasion and durable.
High-pressure and 2 wire braid EN 857 2SC hydraulic hose is suitable for hydraulic systems where tight bends and maximum abrasion resistance are urgently required. Its pulse performance and flexibility, better than SAE 100R2 and SAE 100R16. This compact hose is designed for use in medium pressure (up to 400 bar) hydraulic applications, where space is at a premium or greater flexibility is a requirement.
Sinopulse EN857 2SC hydraulic hose approved MSHA and ISO9001:2015 and GOST and SGS . Enabling safer and more reliable use.
EN 857 2SC hose is used in high-pressure hydraulic systems with petroleum and water-based fluids. This hose is designed to withstand pressure and temperature extremes, making it suitable for construction, agricultural, and industrial applications, where need compact and narrow space to install hoses.
EN 857 2SC Structure:
Dętka: high quality synthetic rubber, making the hose resistant to abrasion, corrosion and oil.
Wzmocnienie: two layers of high tensile braided steel wires, making the hose work well in high pressure environment.
Okładka: abrasion, corrosion, weather, ozone, aging, sunlight and cut resistant synthetic rubber, making the hose have long service life.
EN 857 2SC Feature
Working temperature: -40 °C to +100 °C.(-40°F to 212°F)
ID: 1/4-inch to 1-1/4-inch
Ciśnienie robocze: Up to 5800 PSI at 1/4” ID
Burst Pressure: Up to 23200 PSI
Safety Factor: 4:1
Meets performance requirements: EN 857 2SC hose Meets or exceeds the performance requirements of SAE 100R16, EN 857 2SC, MSHA certified, higher EN/DIN pressures, SAE J1942/USCG.
High pressure Application range: EN 857 2SC Hydraulic hose is the ideal hose for high pressure applications requiring tight bends. EN 857 2SC hose is capable of handling petroleum and water-based hydraulic fluids.
Excellent pulsation performance: EN 857 2SC hose has Excellent pulsation performance!
Flexible hoses: EN 857 2SC is more flexible than EN853 2SN hoses.
The specification of EN 857 2SC steel wire reinforced hydraulic hose
| Numer części | ID | OD | WP | BP | BR | Waga | |||
| Kropla | Cal | mm | mm | MPa | PSI | MPa | PSI | mm | kg/m |
| EN857 2SC-04 | 1/4" | 6.4 | 14.2 | 40.0 | 5800 | 160 | 23200 | 75 | 0.296 |
| EN857 2SC-05 | 5/16" | 7.9 | 16.0 | 35.0 | 5075 | 140 | 20300 | 85 | 0.327 |
| EN857 2SC-06 | 3/8" | 9.5 | 18.3 | 33.0 | 4785 | 132 | 19140 | 90 | 0.398 |
| EN857 2SC-08 | 1/2" | 12.7 | 21.5 | 27.5 | 3988 | 110 | 15950 | 130 | 0.500 |
| EN85 72SC-10 | 5/8" | 15.9 | 24.7 | 25.0 | 3625 | 100 | 14500 | 170 | 0.632 |
| EN857 2SC-12 | 3/4" | 19.1 | 28.6 | 21.5 | 3118 | 86 | 12470 | 200 | 0.738 |
| EN857 2SC-16 | 1" | 25.4 | 36.6 | 16.2 | 2393 | 66 | 9570 | 250 | 1.034 |
Fabryka Sinopulse
Surowiec:
Importowany materiał gumowy Wietnam i Tajlandia
Wysoka wytrzymałość drutu stalowego 2750Mpa z fabryki najwyższej klasy w Chinach
Mocne, bezpieczne i stabilne produkty z wężami hydraulicznymi
Dobra dyspersyjność, wysokie ciśnienie nośne i doskonała wydajność pulsacyjna.
Doskonała odporność na olej, ciepło i starzenie.
Doskonała odporność na zginanie i zmęczenie
Warsztat fabryczny:
Sinopulse to 100% producent węży hydraulicznych i przemysłowych, obejmujących wszystkie dziedziny przemysłu naftowego, rolnictwa, transportu, budownictwa, górnictwa i leśnictwa.
Dzienna wydajność 500 000 metrów węży, powierzchnia warsztatu 40 000 m²
40 linii produkcyjnych, w tym maszyny do szybkiego łączenia, maszyny do oplatania, maszyny spiralne o dużej prędkości, automatyczne maszyny przemysłowe włoskiej firmy VP oraz kompletna seria urządzeń do badań laboratoryjnych
W skład naszego wspaniałego zespołu wchodzi 120 wykwalifikowanych pracowników, 6 inżynierów, 2 doradców technicznych ze znanych międzynarodowych firm, 2 działy kontroli jakości i 2 kierowników magazynu.
50 specjalistów ds. sprzedaży i trzy grupy specjalistów ds. logistyki obsługują naszych klientów z Włoch, Niemiec, Wielkiej Brytanii, Hiszpanii, USA, Kanady, Brazylii, Argentyny, Panamy, Peru, Chile, Wietnamu, Indonezji, Australii i Rumunii
Laboratorium:
Nasza fabryka dysponuje pełną gamą sprzętu do badań laboratoryjnych. Dysponujemy zaawansowanymi możliwościami laboratoryjnymi, umożliwiającymi przeprowadzanie testów jakości produktów oraz prac badawczo-rozwojowych, aby zapewnić stabilną i doskonałą jakość produktów.
Po zakupie surowców testujemy każdą partię, aby mieć pewność, że spełnia ona techniczne wymagania naszego produktu.
Po wyprodukowaniu testujemy każdy wąż, jego działanie i ciśnienie rozrywające, a także przeprowadzamy test pulsacyjny dla każdego zamówienia, aby upewnić się, że po opuszczeniu fabryki wąż spełnia wymagania normy 100%.
Dokładamy wszelkich starań, aby dostarczać naszym klientom węże najwyższej jakości, robiąc wszystko, co w naszej mocy, aby zagwarantować ich jakość.
„Aby nasi użytkownicy czuli się komfortowo podczas użytkowania i bezpiecznie podczas jazdy!” to nasz wspólny cel.
Opakowanie produktu:
1. W przypadku pakowania węży hydraulicznych do kartonów lub skrzyń drewnianych zgodnie z wymaganiami klienta.
2. Po zakończeniu produkcji węża zapakujemy go.
3. Do pakowania używa się zazwyczaj worków tkanych i folii plastikowych.
4. Specjalne opakowania mogą być dostarczone zgodnie z wymaganiami klienta. Specjalne opakowania są życzeniem klientów Edible ACC Ording.
Przykład ciągłej linii marki:
| SINOPULSE HYDRAULIC HOSE G2SC-4 EN 857 2SC 1/4" (DN6.3) Max. W.P. 40MPa (5800PSI) -2Q11- |
Znajdź zaufanego fabryka węży. Wszelkie pytania i problemy możesz zgłaszać nam w każdej chwili.
Gorące produkty
Powiązany produkt
What is EN857 2sc
EN 857 2SC steel wire reinforced hydraulic hose is similar to EN 853 2SN steel wire reinforced hydraulic hose in structure. The difference is that it has smaller outside diameter, which is suitable for the equipment piping whose installation space is compact and narrow. It is also composed of three parts: tube, reinforcement and cover. The tube is made from oil, abrasion and corrosion resistant synthetic rubber, making it transport water and petroleum-based hydraulic fluids without any deformation in the working temperature of -40 °C to +100 °C. The reinforcement is made from two layers of high tensile steel wires, making the hose highly resistant to high pressure. Therefore, the hose has excellent performance in the high pressure working conditions. The cover is made from high quality synthetic rubber, making the hose resistant to abrasion, corrosion, chemical fluids, weather, ozone, aging, sunlight and cut.
What is the different between EN857 2sc and 100r16s
EN is the British standard and SAE is the American standard, they are the same in terms of dimensional pressure, etc.
What is en857 2sc hose?
EN857-2SC double wire braided hydraulic hose is a high-performance hydraulic hose, widely used in industrial and mechanical equipment, especially high-pressure hydraulic systems, softer than 2sn
What is en 857 2sc?
en857 2SC hose is composed of double single wire braid reinforcement and is designed to handle medium pressure applications, commonly used in industrial and mechanical equipment
How to read hydraulic hose numbers?
Hydraulic hose numbers usually indicate the specifications of the hose, including its diameter, pressure rating and type. For example, a hose marked "1/4- WP 3000 PSI" means that it has a 1/4-inch inner diameter, size 04, and a working pressure of 3000 PSI.
Where can en857 2SC hose be used
EN857-2SC hose is suitable for a variety of hydraulic systems, especially when it comes to delivering hydraulic oil in confined spaces
How is en857 2SC hose composed
EN857-2SC hose is a high-pressure wire braided hydraulic hose that is often used for hydraulic oil delivery in confined spaces. Its structure includes an oil-resistant synthetic rubber inner layer, two wire braided reinforcement layers, and an oil-resistant and weather-resistant synthetic rubber outer layer. This design makes the EN857-2SC hose ultra-flexible and high-pressure, suitable for various occasions requiring high-pressure hydraulic transmission.
How to crimp the joint on the EN857 2SC hose
This hydraulic hose does not need to peel off the outer rubber layer when crimping the joint, and can be crimped directly using a crimping machine
What is EN 857 2sc
EN 857 2SC steel wire reinforced hydraulic hose is similar in construction to EN 853 2SN steel wire reinforced hydraulic hose. The difference is that it has a smaller outside diameter and is suitable for equipment piping with compact and narrow installation spaces. It also consists of three parts: tube body, reinforcement and cover. The hose is made of oil-, abrasion- and corrosion-resistant synthetic rubber, allowing it to transport water and petroleum-based hydraulic fluids at operating temperatures ranging from -40°C to +100°C without any deformation. The reinforcement layer is made of two layers of high-strength steel wire, which makes the hose highly resistant to high pressure. Therefore, the hose has excellent performance under high pressure working conditions. The outer rubber layer is made of high quality synthetic rubber, which makes the hose resistant to abrasion, corrosion, chemical liquids, weather, ozone, aging, sunlight and cutting.
What is DIN EN 857 2sc
EN857 2SC is a European standard for steel wire braided hydraulic hoses. The standard specifies the construction, materials, performance requirements and test methods of hydraulic hoses, etc. EN857 2SC hydraulic hoses are commonly used in low and medium pressure hydraulic piping systems, especially for industrial environments that require high temperature, corrosion and abrasion resistance. Due to its excellent performance, this hose is widely used in ships, vehicles, industry and other fields.
Why choose China EN857 2sc factory - Sinopulse
Sinopulse has established a strict quality assurance system and passed ISO9001 certification. The main products have reached the international level of the same industry after testing by the relevant departments. Our main products: steel wire reinforced hydraulic hose, steel wire spiral hydraulic hose, high pressure steam hose, high pressure air hose, textile reinforced hydraulic hose, thermoplastic hydraulic hose, nylon resin hose and rotary drilling hose. Our products are characterized by high pressure resistance, high temperature resistance, high flexibility, small pulse-pressure deformation, large use length and easy maintenance. Therefore, they are widely used in engineering machinery, coal, petroleum, chemical, metallurgy, mining, construction and transportation industries.
What is 2sc hydraulic hose
2SC hydraulic hose is structurally similar to wire-reinforced EN 853 2SN hydraulic hose. The difference is that its outside diameter is smaller, making it suitable for equipment piping with a compact, narrow installation space.
May i buy bulk 2sc hydraulic hose?
Of course you can do that, because the hoses we produce are bulk Hydraulic hose can be cut to desired lengths and compatible hose fittings can be attached to the end of the hose to create custom hydraulic hose assemblies that can be attached to equipment. Hydraulic hoses are used to transfer fluids in high-pressure petroleum and water-based hydraulic systems commonly found in industrial, mining and manufacturing equipment. These hoses are reinforced to maximize their strength.