EN 853 2SN Hydraulic Hose
The EN 853 2SN high-pressure hydraulic hose has a reinforcing layer consisting of two layers of braided steel wire.
DIN EN 853 2SN hoses are composed of a multi-layer structure:
- Inner layer: Oil-resistant synthetic rubber
- Reinforcing layer: 2 layers of braided steel wire
- Outer layer: Abrasion-resistant synthetic rubber
This design ensures the durability and strength of high-pressure hoses (HPH) conforming to DIN EN 853 2 SN standards. Thanks to the double-layer metal wire braid, these hydraulic hoses can withstand higher system operating pressures than comparable hoses with a single reinforcing layer.
Sinopulse offers high-pressure hydraulic hoses (2 SN) conforming to European standards EN853 or DIN20022. Our 2SN high-pressure hoses are all manufactured using high-quality materials, ensuring long service life and ease of use. Various fittings and hose lengths are available upon request.
| Code | Size | Inside Diameter | Outside Diameter | Working Pressure | Bursting Pressure | Bend Radius | Weight | Length | ||||
| # | Dash | mm | Inch | mm | mm | bar | psi | bar | psi | mm | kgs/m | m |
| SNP-2SN03 | 2SN-03 | 4.8 | 3/16" | 4.6-5.4 | 14.1 MAX . | 415 | 6017.5 | 1660 | 24070 | 90 | 0.34 | 50/100 |
| SNP-2SN04 | 2SN-04 | 6.4 | 1/4" | 6.2-7.0 | 15.7 MAX . | 400 | 5800 | 1600 | 23200 | 100 | 0.372 | 50/100 |
| SNP-2SN05 | 2SN-05 | 7.9 | 5/16" | 7.7-8.5 | 17.3 MAX . | 350 | 5075 | 1400 | 20300 | 115 | 0.43 | 50/100 |
| SNP-2SN06 | 2SN-06 | 9.5 | 3/8" | 9.3-10.1 | 19.7 MAX . | 330 | 4785 | 1320 | 19140 | 125 | 0.56 | 50/100 |
| SNP-2SN08 | 2SN-08 | 12.7 | 1/2" | 12.3-13.5 | 23.0 MAX . | 275 | 3987.5 | 1100 | 15950 | 180 | 0.64 | 50/100 |
| SNP-2SN10 | 2SN-10 | 15.9 | 5/8" | 15.5-16.7 | 26.2 MAX . | 250 | 3625 | 1000 | 14500 | 205 | 0.732 | 50/100 |
| SNP-2SN12 | 2SN-12 | 19.1 | 3/4" | 18.6-19.8 | 30.1 MAX . | 215 | 3117.5 | 860 | 12470 | 240 | 0.93 | 50/100 |
| SNP-2SN16 | 2SN-16 | 25.4 | 1" | 25.0-26.4 | 38.9 MAX . | 165 | 2392.5 | 660 | 9570 | 300 | 1.36 | 50/100 |
| SNP-2SN20 | 2SN-20 | 31.8 | 1.1/4" | 31.4-33.0 | 49.5 MAX . | 125 | 1812.5 | 500 | 7250 | 420 | 1.85 | 20/40 |
| SNP-2SN24 | 2SN-24 | 38.1 | 1.1/2" | 37.7-39.3 | 55.9 MAX . | 90 | 1305 | 360 | 5220 | 500 | 2.3 | 20/40 |
| SNP-2SN32 | 2SN-32 | 50.8 | 2" | 50.4-52.0 | 68.6 MAX . | 80 | 1160 | 320 | 4640 | 630 | 2.65 | 20/40 |
Applications of EN 853 2SN High-Pressure Hoses
2SN high-pressure hoses are widely used in hydraulic systems across industries such as agriculture, roads, construction, mining, automotive, logging, drilling, and special equipment. They serve as flexible conduits for conveying various hydraulic oils, lubricants, petroleum, and other liquids, with an operating temperature range of -50°C to +150°C. DIN 2SN high-pressure hose assemblies are primarily used as flexible conduits in hydraulic networks. They are indispensable in hydraulic systems for a wide range of applications:
Construction
Agriculture
Recording
Mining
Oil Refining
Natural Gas Production
Public Utilities
And others
Hydraulic hoses and 2SN hoses are widely used in equipment conveying high-pressure water. These hoses include sewer cleaning hoses and general cleaning hoses. These hoses are particularly suitable for cleaning sewers, removing scale buildup from pipe walls, and other similar applications.
Furthermore, 2SN EN 853 high-pressure hoses are used for high-pressure cleaning in car washes, industrial plants, public works, and fire protection.
DIN EN 853 2SN Characteristics
Our product catalog includes double-braided high-pressure hoses specifically designed for pressure transmission:
Pure water;
Lubricating oil;
Petroleum fluids;
Water-glycol fluids.
The type of hydraulic hose depends on the intended use and operating conditions. Different models of hose vary in the following parameters:
Nominal inner diameter. Ranges from 5 mm (3/16 inch) to 51 mm (2 inch). This is indicated by the corresponding numbers on the product label: e.g., high-pressure hydraulic hose 2SN 12, 10, 38, etc.
Working pressure: Depending on the product type and application, the working pressure ranges from 80 to 400 bar.
Burst pressure: For double-braided hoses, this value ranges from 320 to 1600 bar.
Bending radius: Values range from 100 mm to 630 mm.
Operating temperature: The permissible temperature range depends on the type of medium being transported. For most working fluids, the temperature range is -40 to +100 degrees Celsius; for water, it is up to +85 degrees Celsius; and for air, it is up to +70 degrees Celsius.
When selecting hoses for a specific device or compressor outlet cross-section, both the hose's outer and inner diameters must be considered. The selection of fittings and compression fittings is based on the sizes in the high-pressure hose catalog.
Related Product
What is a 2SN high-pressure hose?
The 2SN high-pressure hose is a high-pressure double-braided hose reinforced with double steel wires, designed to withstand high-intensity hydraulic loads and operate in harsh conditions.
What is the difference between a 2SN hydraulic hose and a 1SN hydraulic hose?
The 2SN model features double reinforcement, enabling it to withstand higher pressures and better resist bending and impact loads.
What is the maximum working pressure that a 2SN hose can withstand?
Depending on the inner diameter, the working pressure ranges from 250 to 400 bar, with a safety margin of up to four times that value.
Can I order a 2SN hose of a specific length or with specific fittings?
Yes, Sinopulse can customize hose lengths, connection types, and fitting configurations according to customer requirements.
In what fields are 2SN high-pressure hydraulic hoses used?
These hoses are used in hydraulic systems for construction and agricultural machinery, pressing equipment, lifts, cranes, and machine tools.
Ordering hoses
Sinopulse supplies hydraulic hoses conforming to EN 853/2SN standards, as well as various sizes of fittings. We can also provide complete hydraulic hose assemblies according to customer requirements. Reliability and quality are our core values. Creating more value for our customers is our pursuit.
We use high-quality materials and advanced technology, and have our own quality control department and testing equipment to provide our partners with truly reliable and reasonably priced products. We can customize products according to customer drawings or samples.
Our sales consultants will help you choose the right product for your needs. To place an order, you can submit an application on our website or contact our manager via email at sales@sinopulse.cn.
Quality Assurance: All components of the high-pressure hose meet the highest quality and reliability requirements, have a long service life, and come with a 24-month warranty.
Premium Rubber: High-pressure hoses are made with premium rubber, with an inner layer that resists corrosive environments and an outer layer that resists mechanical shock.
High Load Capacity: The selection of hose fittings should be based on the expected operating conditions and be able to withstand high loads.
Variety of Products: A variety of sizes, designs, and connection methods are available, allowing you to choose the right hydraulic hose for any working condition and area.