Wire Braid Textile Cover Hose
Wire Braid Hose Manufacturer in China
We offer hydraulic hoses for pressure and steel wire braided hydraulic hoses for high temperatures.

Wire Braid Hose

Wire braid hydraulic hose is a rubber hose reinforced with one or two layers of high-strength steel wire braid, commonly used in hydraulic systems to transmit hydraulic fluid under pressure.

Sinopulse wire braid hydraulic hoses, couplings, and accessories have high-performance flexibility. The one or two braid wire reinforcement technology gives this hose a high resistance to kinking, excellent tensile strength, and a tighter bend radius, ideal for high and medium-pressure petroleum, water-based, and general industrial fluid conveyance.

Types of surfaces: smooth surface, wrapped surface and textile cover to choose.

Textile Cover Hose Advantage:The braided textile cover reinforces the hose and is resistant to heat, ozone and weathering.

Pressure Ratings: It is typically categorized into low-pressure, medium-pressure, high-pressure, and ultra-high-pressure classes, with working pressure ranges varying from 1000 PSI to 6000 PSI, depending on your application requirements.

Temperature Range: Typically from -40°C to 100°C (-40°F to 212°F).

Fittings: The fittings for wire braid hydraulic hoses include hydraulic fittings, adapters, flanges, quick couplings, elbows, tees, ferrules, sleeves, and seals, which are used for convenient connection, installation, and maintenance of hydraulic systems.

Applications: Wire braid hydraulic hoses are commonly used in various hydraulic systems, including industrial, agricultural, construction, and mining equipment, such as loaders, excavators, forklifts, and tractors.

 

SAE 100R1AT / 1SN Hydraulic Hose

One steel wire braided Hydraulic Hose

Tube: High-strength synthetic rubber.

Reinforcement: One layer of high-strength steel wire mesh.

Cover: anti-abrasive synthetic rubber, resistant to oils, fuels, and atmospheric conditions.

It is recommended for hydraulic system service with petroleum and water-base fluids ...

SAE 100R2AT 2SN Hydraulic Hose

Two steel wire braided Hydraulic Hose

High-pressure hydraulic oil lines used in construction, machine tool, and agricultural applications using petroleum- or water-based hydraulic fluids

Tube: High-strength synthetic rubber.

Reinforcement: Two layers of high-strength steel wire mesh.

Cover: Anti-abrasive synthetic rubber, resistant ...

SAE 100R5 Hydraulic Hose (Textile Cover)

One steel wire braided Hydraulic Hose

Recommended for air brakes, fuel, grease lines, high-temperature petroleum oils and medium-pressure hydraulic applications. Sizes -16 thru -24 are not SAE or DOT-approved for air brake applications.

Tube: High-strength synthetic rubber.

Reinforcement: One layer of high-strength steel ...

DIN EN857 1SC Hydraulic Hose

One steel wire braided Hydraulic Hose

Main Applications: Low-medium pressure lines, return lines

Tube: High-strength synthetic rubber.

Reinforcement: One layer of high-strength steel wire mesh.

Cover: Anti-abrasive synthetic rubber, resistant to oils, fuels, and atmospheric conditions.

EN857 2SC braided hydraulic hose

Two steel wire braided Hydraulic Hose

Main Applications: Medium-high pressure lines

Tube: High-strength synthetic rubber.

Reinforcement: Two layers of high-strength steel wire mesh.

Cover: Anti-abrasive synthetic rubber, resistant to oils, fuels, and atmospheric conditions

SAE 100R16

Two steel wire braided Hydraulic Hose

Tube: High-strength synthetic rubber.

Reinforcement: Two layers of high-strength steel wire mesh.

Cover: Anti-abrasive synthetic rubber, resistant to oils, fuels, and atmospheric conditions.

SAE 100R17 braided hydraulic hose

One or Two steel wire braided Hydraulic Hose

Tube: High-strength synthetic rubber.

Reinforcement: 1/4″, 5/16″, 3/8″ and 1/2″ are reinforced with a layer of

braided high-strength steel wire; 5/8″, 3/4″ and 1″ are reinforced with two layers of braided high-strength steel wire;

Cover: Anti-abrasive synthetic rubber, resistant to ...

Single-WIRE BRAID HOSES

This single-wire hydraulic hose features a steel wire braid reinforcement, providing robust and dependable performance for industries needing durable hose solutions. The MSHA-certified outer cover is weather and abrasion-resistant, ensuring reliable operation in temperatures ranging from -40°F to 212°F. This makes it suitable for a variety of environments and applications.

Single-WIRE BRAID HOSES
Single-WIRE BRAID HOSES

Construction: The single-wire braid hydraulic hose is made of oil-resistant synthetic rubber lining, single-wire braid reinforcement, and oil, fuel and abrasion-resistant rubber cover.

Tube: oil-resistant synthetic rubber

Reinforcement: 1 Wire Steel Wire Braid

Cover:  MSHA Certified, Vulcanized Abrasion and Weather Resistant Synthetic Rubber

Temp Range: -40°F/-40°C to 212°F/100°C (+248°F/120°C max.)

 

 

DOUBLE WIRE BRAID HOSES

This double-wire hydraulic hose is a medium-pressure hydraulic hose. It contains two braids of high-tensile steel wire for reinforcement. Key Features: • Black, oil resistant synthetic rubber liner • Supports mineral and biological oils from -40°F to +212°F • Polyglycol water-oil emulsions and water up to 185°F • Maximum intermittent temperature is 250°F.

DOUBLE WIRE BRAID HOSES
DOUBLE WIRE BRAID HOSES

Double wire braid hydraulic hose construction: It is made of a synthetic rubber lining of oil resistance, two wire braid reinforcement separated by a synthetic rubber layer, and a synthetic rubber cover that is oil, fuel, weather, and abrasion resistant.

 

Type of wire braid hydraulic hoses

SINGLE WIRE BRAID HOSES

To provide a flexible connection in hydraulic systems with steel tubing or steel pipework, single-wire braided hoses have a rubber hose, a single braided steel wire and a rubber cover. Single-wire braided hydraulic hose is made of an oil-resistant synthetic rubber liner, single-wire braid reinforcement and an oil-, grease- and abrasion-resistant rubber cover.

SAE R1 Braided Hydraulic Hose

Abrasion, ozone, and weather resistant synthetic rubber. Meets flame resistant MSHA designation

SAE 100 R1 AT1" I.D. hose
SAE 100 R1 AT
Hose code Size Dash size ID WD OD
A AT
mm inch min max min max min max max
SAE 100R1-01 5 mm 3/16″ -3 4.6 5.4 8.9 10.1 11.9 13.5 12.5
SAE 100R1-02 6.3 mm 1/4″ -4 6.2 7.0 10.6 11.7 15.1 16.7 14.1
SAE 100R1-03 8 mm 5/16″ -5 7.7 8.5 12.1 13.3 16.7 18.3 15.7
SAE 100R1-04 10 mm 3/8″ -6 9.3 10.1 14.5 15.7 19.0 20.6 18.1
SAE 100R1-05 12.5 mm 1/2″ -8 12.3 13.5 17.5 19.0 22.2 23.8 21.5
SAE 100R1-06 16 mm 5/8″ -10 15.5 16.7 20.6 22.2 25.4 27.0 24.7
SAE 100R1-07 19 mm 3/4″ -12 18.6 19.8 24.6 26.2 29.4 31.0 28.6
SAE 100R1-08 25 mm 1″ -16 25.0 26.4 32.5 34.1 36.9 39.3 36.6
SAE 100R1-09 31.5 mm 1-1/4″ -20 31.4 33.0 39.3 41.7 44.4 47.6 44.8
SAE 100R1-10 38 mm 1-1/2″ -24 37.7 39.3 45.6 48.0 50.8 54.0 52.0
SAE 100R1-11 51 mm 2″ -32 50.4 52.0 58.7 61.9 65.1 68.3 65.9

DOUBLE WIRE BRAID HOSES

A 2 layer of steel wire braid is added when a single wire braid hose does not provide a measure of safety. There are two reasons for this: the extra wire provides higher working pressure, and if the hose cover is damaged and the outer braid may rust and fail, the inner braid is still protected. This is an important consideration when a hose is damaged externally and then left out in the weather (e.g. agricultural machinery). Double steel wire braided hydraulic hoses are widely used in daily life and industry due to their affordable price, wide range of applications, and the fact that they provide a certain level of safety.
It can withstand very high temperatures, pressures and vacuums. Due to the manufacture of the second steel wire braid, all possibilities of bursting are reduced to a great extent.
Double wire braided hydraulic hose structure: made of oil-resistant synthetic rubber liner, synthetic rubber layer separated by two wire braid reinforcement, oil, fuel, weather and abrasion resistant synthetic rubber cover.

SAE 100R2 wire braid hose

DIN EN853 2SN/SAE 100R2AT
SAE 100R2 wire braid hose
Part No. I.D.  O.D. W.P B.P B.R W.T
Dash Inch mm mm MPa PSI MPa PSI mm kg/m
SAE100R2-03 3/16″ 4.8 13.4 41.5 6018 166 24070 90 0.320
SAE100R2-04 1/4″ 6.4 15.0 40.0 5800 160 23200 100 0.352
SAE100R2-05 5/16″ 7.9 16.5 35.0 5075 140 20300 115 0.443
SAE100R2-06 3/8″ 9.5 18.9 33.0 4785 132 19140 125 0.540
SAE100R2-08 1/2″ 12.7 22.2 27.5 3988 110 15950 180 0.680
SAE100R2-10 5/8″ 15.9 25.6 25.0 3625 100 14500 205 0.779
SAE100R2-12 3/4″ 19.1 29.3 21.5 3118 86 12470 240 0.941
SAE100R2-16 1″ 25.4 37.8 16.5 2393 66 9570 300 1.350
SAE100R2-20 1.1/4″ 31.8 44.3 12.5 1813 50 7250 420 2.100
SAE100R2-24 1.1/2″ 38.1 50.3 9.0 1305 36 5220 500 2.650
SAE100R2-32 2″ 50.8 63.8 8.0 1160 32 4640 630 3.400

 

Braided Hose Different Materials

Stainless Steel Braided Hose

316L-core stainless steel braided hose with 321 stainless steel double braid for increased hose pressure. The corrugated core is flexible to limit kinking. It is typically used in high-temperature vacuum and high-pressure corrosive environments or where penetration is undesirable.

Sizes range from 1/4 in. to 2 in. and working pressures from vacuum to 6000 psig (413 bar), and standard and custom assemblies are available, with options including hose covers, hose tags, and additional helium leak testing.

Textile Braided Hose

Textile braided hose is a type of hydraulic hose made of multiple layers of fabric or yarn. The inner layer of the hose is usually made of a synthetic rubber material, while the reinforcing layer is made of a textile material

The layers are then bonded together using a special adhesive or vulcanisation process. The result is a strong, flexible and durable hose.

In contrast to steel wire reinforced hose, textile braided reinforced hydraulic hose is designed for low to medium pressure hydraulic hose applications.

FAQ

What is wire braid hydraulic hose?

Wire braid hydraulic hoses use one or two braid wire reinforcement technology gives this hose a high resistance to kinking, excellent tensile strength, and a tighter bend radius, ideal for high and medium pressure petroleum, water-based, and general industrial fluid conveyance.

Braided hose is the most popular hydraulic hose, primarily due to its excellent strength and flexibility. While available in an extensive selection of pressure ratings and sizes, the pressure rating is reduced with increases in inner tube ID. This equates to the hose having a four to one safety factor, with working pressure rated at a quarter of burst pressure.

Braided hoses are used in low to medium, less intensive pressure applications such as engines, hydraulic lifts and return lines.

What are Steel wire braided hydraulic hoses?

Steel wire braided hoses can be used to transport petrochemicals and hydraulic fluids under relatively high pressures and temperatures. In addition, oil-resistant wire braided hoses can provide flexible connections between steel pipes in hydraulic systems. They can find their applications in the fields of mine hydraulic bracket, automatic hydraulic systems of oil field exploiting machine, mine projects and other industrial sectors, especially used as jackhammer component. It can withstand in the temperature of -40°C to +100°C, and the maximum temperature can be +125°C. Also the surface of steel wire braided hydraulic hose can be two types, including smooth and fabric surface.

Which Manufacturer should I Choose to Buy Wire Braid Hoses?

Sinopulse Hose Factory Co., Ltd has 20 years of manufacturing and exporting experience in every types of hydraulic hoses, industrial hose, and fittings. as a professional braided hose manufacturer, we has passed ISO 9001 and MSHA certificates. The Brand Sinopulse is sold in many countries worldwide and has helped customers increase their market share in the local market. We are your best choice of braided hose manufacturer! Contact us now!

 

 

 

 

 

Send Your Inquiry Today
Contact Form(#6)
Scroll to Top